Характеристики и описание
Mechanical values and environment | |
|---|---|
| Housing material | Polyamide PA 6.6 |
| Ambient temperature | 0 ... 55 °C |
| Degree of protection | IP20 |
| Mounting method | Mounting rail 35mm according to DIN EN 60715 TH35 |
| Reaction time | |
| Safety circuit off | max.50 ms |
| Connection | Connection terminals |
| E1 terminal I1, E2 terminal I2, E3 terminal I3 | |
| Number of inputs | 3 |
| Terminal 1.Y1, I+ | |
| Number of inputs | 1 |
| Output contact set 1: 1.13, 1.14{} output contact set 2: 1.23, 1.24 | |
| Number of safety contacts | 1 |
Electrical connection ratings | |
| ASi voltage | |
| DC | 30 V |
| ASi operating current | max.200 mA |
| Current | 0,1 A Supply for sensors |
| LED indicator | |
| 3 LEDs yellow (I1, I2, I3) state of input E1, E2 and E3 | |
| 1 x LED yellow (1. Y1) state EDM input 1.Y1 | |
| LED green (Pwr) AS-i power supply | |
| LED red (Fault) AS-i fault | |
| LED yellow (Out) relay has switched and error message | |
| LED red (Alarm) PLC is signaling alarm | |
| Rated insulation voltage Ui | 6000 V |
| Overvoltage category according to IEC EN 60664-1 | 3 |
| Connecting cable | 9W |
| Max. contact load | |
| DC -13 | 3A 24V |
| AC -15 | 3A 250V |
| E1 terminal I1, E2 terminal I2, E3 terminal I3 | |
| Type of input | standard |
| Terminal 1.Y1, I+ | |
| Type of input | Feedback loop (EDM) |
| Current via feedback loop | |
| at 24V DC | 10 mA From AS-i (EDM) |
| Output contact set 1: 1.13, 1.14{} output contact set 2: 1.23, 1.24 | |
| Type of output | |
| 2 NO contacts per safety output | Relay contacts, floating, positively driven (redundant) |
Interface, bus | |
| Data interface | Address programming socket AS-i (ADDR) |
Controls and indicators | |
| Control/indicator | Switch with position RUN/PRG PRG: safety-related AS-i address can be programmed{} protected operation not possible, RUN: Protected operation possible{} non-safety-related AS-i address can be programmed |
Miscellaneous | |
| in compliance with | EN 61 508, EN 62 061, EN ISO 13 849-1 |
Reliability values acc. to EN ISO 13849-1 | |
| Performance Level | PL e |
| Category | 4 |
| PFHD | 3.3 x 10-9 |
| SIL CL | 3 |
| Mission time | 20 y |
Mechanical values and environment
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
Доставка
Оплата и гарантии