general data | |
---|---|
mounting type | flush |
special type | flushlinearized Vehicle |
measuring distance Sd | 0 … 8 mm |
sensitivity | 0,5 V/mm |
resolution | 0,5 V/mm< 0,008 mm (stat.) < 0,01 mm (dynam.) |
repeat accuracy | < 0,016 mm |
linearity error | ± 120 µm |
temperature drift | ± 8 % (Full Scale) |
approvals/certificates | ± 8 % (Full Scale)EN 60947-5-2:2007 EN 13309:2010 EN ISO 14982:2009 ISO 13766:2006 |
electrical data | |
response time (factory characteristic) | < 1 ms |
voltage supply range +Vs | 4,75 … 5,25 VDC |
current consumption max. (no load) | 12 mA |
output circuit | voltage output |
output signal | 0,5 ... 4,5 VDC |
load resistance | > 4500 Ohm |
short circuit protection | yes |
reverse polarity protection | no |
conducted interferers | ISO 7637-2, ISO 16750-2, details see data sheet |
mechanical data | |
type | cylindrical threaded |
housing material | brass nickel plated |
dimension | 18 mm |
housing length | 50 mm |
connection types | flylead connector DT04-3P 3 pin |
tightening torque max. | 40 Nm (A: 28 Nm, B: 28 Nm) |
ambient conditions | |
operating temperature | -40 … +85 °C |
protection class | IP 69K (sensing face/sensor) |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |